Exterior Wall Rock Wool Board
Insulvora manufactures exterior wall rock wool board for building façades and exterior-wall insulation systems. Supplied as rigid mineral-wool panels, the product provides thermal insulation and sound absorption in suitable wall assemblies. Boards are prepared around the requested density, thickness, dimensions and project quantity, with performance requirements considered where specified.
Exterior Wall Rock Wool Board Specifications
Available density, thickness and standard dimensions are listed below alongside thermal, mechanical, water-repellency and combustion-performance data. The required board grade should be selected according to the wall system design and the performance criteria stated in the project specification.
Typical Applications
Exterior wall rock wool board can be used as continuous insulation or cavity insulation in approved curtain wall, ventilated rainscreen and other exterior-wall systems with a protective finish. The rigid board format supports consistent fixing patterns and close-fitting joints across large façade areas.
Suitable density, grade and thickness depend on the substrate, anchors, cavity width, wind loads, fire-stopping details and exterior finish. Board layouts, cuts and terminations should also be planned around windows, corners and other junctions. The insulation contributes thermal and acoustic performance, while weather protection, drainage and airtightness must be addressed by the complete wall system.
Performance & Product Data
Thermal performance depends on the board's thermal conductivity, installed thickness and insulation continuity at joints and fixings. Fixing arrangements affect thermal bridging, stability and joint fit, so the installed assembly matters as much as nominal board dimensions.
Compressive strength helps assess mechanical and installation suitability. However, the board is not a structural wall component unless the system is specifically designed for that function. Water repellency indicates resistance to water uptake under specified test conditions; it does not replace the wall's weather barrier or drainage construction.
Class A1 (GB 8624) describes the tested board's reaction-to-fire performance. Cavity fire stops, fixings, finishes and the complete wall assembly determine system-level fire performance. These distinctions should be considered when comparing material specifications with project requirements.
Factory Supply & Order Specification
Insulvora supplies exterior wall rock wool board according to the project's required specification. To request a quotation, provide the target density, thickness, board dimensions and quantity. Include any specified thermal conductivity, combustion performance, compressive strength or water-repellency requirements so that the quoted product corresponds to the intended wall application.
Where project documentation is required, available product data and supporting technical information can be provided for the exterior-wall board specification being quoted. The specific document request can be included with the purchasing inquiry.
Container Loading Reference
Estimated board area per container for 1200 × 600 mm boards.
| Thickness | 20GP | 40GP | 40HQ |
|---|---|---|---|
| 30 mm | 868 m² | 1,763 m² | 2,000 m² |
| 50 mm | 521 m² | 1,058 m² | 1,200 m² |
| 60 mm | 434 m² | 882 m² | 1,000 m² |
| 80 mm | 326 m² | 661 m² | 750 m² |
| 100 mm | 261 m² | 529 m² | 600 m² |
| 120 mm | 217 m² | 441 m² | 500 m² |
| 150 mm | 174 m² | 353 m² | 400 m² |
For preliminary freight planning only. Figures assume 60 m³ of board volume per 40HQ; 20GP and 40GP estimates are scaled by container volume. Actual loading depends on packing, pallets, stacking and permitted payload. The final loading plan is confirmed with the quotation.
Related Rock Wool Products & Resources
Request an Exterior Wall Rock Wool Board Quote
For façade and exterior-wall projects, contact Insulvora to discuss board suitability and request a quotation for project or bulk supply. Describe the intended wall assembly and required board grade so that the inquiry can focus on your application rather than general product information.
