Roof & Building Envelope

Roof Insulation Materials for Metal Roofs and Thermal Assemblies

Insulvora manufactures and supplies roof insulation materials in flexible rolls, sheets, boards and selected aluminum-faced configurations for metal roofs, industrial buildings, warehouses, sunrooms and related thermal assemblies. This page brings together six product families, each linked to its own available specifications and options.

Choose a product by roof construction, installation method, available depth, facing and thermal requirements. Once the product form is identified, specifications and project quantity can be reviewed for a product-specific quotation.

Roof Insulation Materials
Roof Product Range

Roof Insulation Materials by Form and Facing

The six products below differ in format, foil finish, reinforcement, color, adhesive backing and service conditions. Compare the offered configuration with the roof assembly rather than selecting by nominal thickness alone.

01 Embossed grid aluminum-faced rubber foam sheet and roll

Foil Roof Insulation Roll

Density65–85 kg/m³

Flexible aluminum-faced insulation supplied as a roof insulation roll or sheet for roof and sunroom applications. Listed thicknesses are 5, 10, 20, 30 and 50 mm. Options include square-grid or double-sided aluminum facing and self-adhesive backing.

View Foil Roof Insulation Roll
02 Reinforced foil faced rubber foam insulation board

Reinforced Foil Insulation Board

Density65–85 kg/m³

Reinforced aluminum-faced elastomeric insulation for roof and sunroom projects. The listed product family includes 0.10 mm aluminum-foil reinforcement, selectable surface finishes, self-adhesive or selected non-adhesive backing, and multiple thickness configurations.

View Reinforced Foil Insulation Board
03 Heavy-duty aluminum-faced rubber foam sheet and roll

Aluminum Sheet Thermal Insulation

Density65–85 kg/m³

Aluminum-faced insulation for roof and sunroom assemblies, with imported square-grid, standard square-grid, grid-pattern or plain aluminum surfaces. Listed thicknesses are 5, 10, 20, 30 and 50 mm, with self-adhesive or non-adhesive backing.

View Aluminum Sheet Thermal Insulation
04 Orange rubber foam insulation sheet roll

Colored Roof Insulation

Density65–85 kg/m³

Colored self-adhesive insulation with square-grid aluminum facing for roof and sunroom applications. The listed main configuration comes in 5, 10, 20, 30 and 50 mm thicknesses, multiple color options and a 1 m² supply basis.

View Colored Roof Insulation
05 High temperature aluminum-faced rubber foam roof insulation board

High Temperature Roof Insulation Board

Density65–85 kg/m³

A roof insulation board family with aluminum-faced, self-adhesive and unfaced configurations. The listed service-temperature range is -40 to +105°C, with thickness options of 5, 10, 15, 20, 25, 30 and 50 mm.

View High Temperature Roof Insulation Board
06 Standard aluminum-faced self-adhesive rubber foam sheet and roll

Self Adhesive Heat Reflective Insulation

Density65–85 kg/m³

Self-adhesive aluminum-faced insulation for roofs, sunrooms and related thermal-control applications. Available configurations include grid, imported double-sided grid, mesh or plain aluminum facing, with listed thicknesses from 5 to 50 mm.

View Self Adhesive Heat Reflective Insulation
Assembly Conditions

Roof Insulation Materials Across Building Systems

Metal, Industrial and Warehouse Roof Assemblies

Metal roofs and industrial buildings may require control of heat gain, heat loss and condensation according to climate and indoor conditions. Coordinate the selected insulation with purlins, liners, cavities, fasteners, framing and panel zones. Warehouse projects may also combine roof, wall and ceiling insulation within one building-envelope specification. Select roof insulation materials in roll or board form according to available depth, thermal targets and installation sequence.

Facing, Moisture and Installation Exposure

Aluminum foil insulation and other faced products must be coordinated with indoor humidity, roof temperature, ventilation and installation exposure. Confirm facing type and reinforcement, the required continuity of joints, and whether roof or cladding protection is needed beyond the insulation facing.

Product Configuration

Thermal Data, Facing, Packing and Roof Supply

For a quotation on roof insulation materials, identify the selected product family and roof assembly first. Technical data and commercial details should relate to the construction actually offered, including the relevant facing or backing.

Thermal Performance and Thickness

For roof insulation materials, use thermal conductivity and resistance data from the offered product at the stated conditions. Select thickness according to the project thermal target, available construction depth and product configuration. Keep roll, board and facing information associated with the corresponding product; for foil faced insulation, confirm the specified facing and insulation core together.

Product Configuration, Packing and Supply

For rolls, confirm width, length, thickness, density where applicable and facing. For boards, specify length, width, thickness, density or grade and surface configuration. Record aluminum foil facing, reinforcement and adhesive backing together with the insulation core where relevant.

Rigid boards and compressible rolls use different packing methods. Before production preparation, Insulvora confirms the specification, quantity, destination, technical documents and packing arrangements. Approved labeling, OEM and project-document requirements are included where applicable.

Request a Roof Insulation Materials Quote

Share your roof type, preferred product form, dimensions, thickness, facing, quantity and destination. Insulvora can review the selected configuration and prepare a quotation for your roofing project or bulk-supply requirement.