Elastomeric Rubber Foam · Roof Insulation Board

High Temperature Roof Insulation Board

Insulvora manufactures high temperature roof insulation board products using closed-cell NBR/PVC elastomeric rubber foam for industrial and factory roofing projects. The product is available with aluminum-faced or unfaced surfaces and self-adhesive or non-adhesive backing. It is intended for roofing assemblies with specified service-temperature and thermal insulation requirements. Product selection should take account of the intended roof construction as well as the board specification.

-40 to +105°C Service temperature range
5–50 mm Available thickness range
≤0.034 W/m·K Thermal conductivity at 0°C

High Temperature Roof Insulation Board Specifications & Thermal Performance

The following specifications describe the available NBR/PVC elastomeric board range. Thickness, facing and backing are selected to match the project requirements.

Available Specifications Roof Insulation Board
Material Closed-cell NBR/PVC elastomeric rubber foam
Density 65–85 kg/m³
Thickness 5 / 10 / 15 / 20 / 25 / 30 / 50 mm
Thermal Conductivity ≤0.034 W/m·K at 0°C
Service Temperature -40 to +105°C
Fire Rating B1
Surface Options Square-grid aluminum facing / double-sided square-grid aluminum facing / mesh aluminum facing / smooth aluminum facing / unfaced rubber foam
Reinforced Aluminum Foil 0.10 mm
Backing Self-adhesive / non-adhesive

The thermal conductivity value is stated at 0°C and should be considered with that reference condition. The listed service-temperature range describes the product's operating range, while the thermal resistance of a roof assembly depends on the selected board thickness and the overall roof construction. These product values should not be treated as a complete roof-system performance specification.

Typical Applications

This board is used as a thermal insulation layer in industrial buildings, factory buildings and other roofing systems that specify elastomeric rubber foam boards. The project should establish its service-temperature conditions, insulation thickness and roof assembly configuration before the board construction is selected.

Aluminum-faced and unfaced versions, together with self-adhesive and non-adhesive backing options, allow the supplied construction to be matched to the required roofing arrangement. The suitability of a particular version depends on the project's specified construction requirements.

Factory Supply & Order Specification

Order Details

For a high temperature roof insulation board order, confirm the required thickness, surface option, backing type, board length and width, and purchasing quantity. Actual board dimensions are determined by the agreed order specification. Project and bulk orders can be produced to a consistent product configuration.

Technical Documentation

Where project purchasing requires supporting documents, Insulvora can provide available thermal data, B1 fire-rating information and other product-related technical documentation for the supplied board. Document requirements can be confirmed together with the selected product specification.

Request a High Temperature Roof Insulation Board Quote

Provide the intended roof application, preferred thickness, surface and backing construction, required dimensions and project quantity. Insulvora can review the requested configuration and confirm available supply details, relevant product documentation and quotation requirements for a project or bulk order.