Aluminum-Faced Rubber Foam · Self-Adhesive Structure

Self Adhesive Heat Reflective Insulation

Insulvora manufactures aluminum-faced insulation using closed-cell NBR/PVC rubber foam as the insulation base. Designed for roofing, sunrooms and related building-insulation applications, it is available with different aluminum facings, foam thicknesses and self-adhesive or non-adhesive backing. The facing and backing configuration can be specified for the intended project or distribution order.

65–85 kg/m³Density range
5–50 mmThickness range
-40 to +105°CService temperature range

Self Adhesive Heat Reflective Insulation Specifications

The product consists of a closed-cell NBR/PVC rubber foam base laminated with an aluminum-facing layer. The available construction is determined by foam thickness, foil-facing type and adhesive-backing choice. The specification range below describes these options alongside the current product data.

Available Specification Range Aluminum-Faced Rubber Foam
MaterialClosed-cell NBR/PVC rubber foam
Density65–85 kg/m³
Thickness5 / 10 / 15 / 20 / 25 / 30 / 50 mm
Thermal Conductivity≤0.034 W/m·K at 0°C
Service Temperature-40 to +105°C
Fire Performance ClassificationB1
Aluminum FacingGrid / Imported Double-Sided Grid / Mesh-Reinforced / Plain Aluminum
Reinforcement0.10 mm aluminum foil
Adhesive BackingSelf-adhesive / Non-adhesive
Performance and configuration notes

Thermal conductivity is stated at 0°C. Reflectivity, emissivity and other surface-related performance values depend on the selected aluminum-facing construction and should not be assumed identical across all facing options. The B1 classification and other technical data should be considered in relation to the rubber foam base, facing and finished product construction selected for supply.

Typical Applications

Self Adhesive Heat Reflective Insulation is mainly used for roofing, sunrooms and related building-insulation areas that require a flexible rubber foam insulation layer with an aluminum-faced surface. Metal roofs and sunroom envelope structures are examples of applications where the material may cover larger continuous areas.

For projects requiring an adhesive-backed construction, the self-adhesive version is available; a non-adhesive version can also be specified. Selection should take account of installation requirements, the required foam thickness and facing configuration rather than the application name alone.

Factory Supply & Order

For project and distribution purchasing, Insulvora supplies Self Adhesive Heat Reflective Insulation in the available thickness, aluminum-facing and backing configurations described above. To prepare a product inquiry, identify the requested foam thickness, facing type, adhesive-backing choice and order quantity.

Where fire classification, operating temperature or other defined technical requirements apply, include them in the inquiry. The relevant product information can then be matched to the configuration being supplied, rather than assumed to apply unchanged to every possible facing and backing combination.

Request a Self Adhesive Heat Reflective Insulation Quote

Share your intended configuration, order quantity and any defined technical requirements. Insulvora can review the requested construction and discuss the applicable product options for a project or bulk-supply quotation.