Colored Rubber Foam · Roof Insulation

Colored Roof Insulation

Insulvora manufactures colored roof insulation made from closed-cell NBR/PVC rubber foam for roofs, sunrooms, and related building insulation projects. The main configuration brings together a square-grid aluminum facing, a rubber foam insulation layer, and a self-adhesive backing. Buyers can select from available thicknesses, colors, and facing forms to match the required product structure and surface appearance.

65–85 kg/m³ Available density range
5 / 10 / 20 / 30 / 50 mm Available thickness range
-40 to +105°C Service temperature range

Colored Roof Insulation Specifications

The available material and configuration details are listed below. Color selection should be considered alongside the specified aluminum-facing structure.

Available Specification Range Colored Rubber Foam Roof Insulation
MaterialClosed-cell NBR/PVC rubber foam
Density65–85 kg/m³
Thickness5 / 10 / 20 / 30 / 50 mm
Thermal Conductivity≤0.034 W/m·K at 0°C
Service Temperature-40 to +105°C
Fire PerformanceB1 designation
Main FacingSquare-grid aluminum facing
BackingSelf-adhesive
Main ColorsOff-white / Blue / Green / Yellow / Gray / Orange

In addition to the main square-grid facing, mesh, flat, imported-grid, and standard-grid aluminum-facing forms are available. Flat colored products can be supplied in gray, off-white, green, blue, yellow, orange, and black. Available colors depend on the selected facing structure.

A double-layer laminated structure is available for the 50 mm thickness.

Performance Notes

Different thicknesses provide different levels of thermal resistance. R-values and other thermal-performance data are provided according to the specific thickness and supplied product structure. Values for one configuration should not be assumed to apply to every available thickness or facing.

Typical Applications

Colored roof insulation is used on roofs, sunrooms, and related building areas requiring a rubber foam thermal insulation layer. It is available in sheet or roll form for larger coverage areas. The colored surface and aluminum-facing texture are especially relevant when the appearance of the insulation remains visible or is part of the project's material requirements.

For different roof constructions, select thickness, color, and facing form according to the application area and intended surface finish. Where a self-adhesive product is required, specify that backing as part of the selected configuration.

Factory Supply & Orders

For project purchasing and bulk orders, Insulvora supplies this series using units appropriate to the product form. The main configuration uses a 1 m² supply unit. Other units—1 m, 10 m, 5 m², and 10 m²—are available for specific forms. Confirm the applicable unit for the selected configuration.

Color Matching

Where a particular color is required, buyers may provide a reference color or sample to identify the closest available option.

Supporting Material

Butyl tape is also available as a supporting item for orders requiring it.

Request a Colored Roof Insulation Quote

Send your project requirements, including the intended application, thickness, preferred color and facing, self-adhesive configuration, and required quantity. Insulvora can review the available product combination and applicable supply unit, then confirm the details needed for a project or bulk-supply quotation.