Colored Rubber Foam Board
Insulvora manufactures colored rubber foam board from closed-cell NBR/PVC foam for projects requiring sheet-form insulation with a defined surface color. The range is intended for compatible HVAC, equipment and building insulation work, including installations where the insulation remains visible. Customers can specify a plain self-adhesive or grid-aluminum-faced self-adhesive construction. Standard thickness availability varies by color, as shown in the specification table below.
Colored Rubber Foam Board Specifications
Not every color shares the same standard thickness range. Read the color-specific combinations alongside the overall product data when preparing an inquiry. The technical figures describe the foam series; adhesive backing or facing may require separate consideration for the chosen configuration.
| Color | Standard Thickness |
|---|---|
| Grey / creamy-white / green / yellow | 10–30 mm |
| Blue | 20–30 mm |
| Orange / black | 30 mm |
The five series thicknesses should not be interpreted as available in every standard color.
Typical Applications
Colored rubber foam board is used where sheet-form insulation is needed and surface appearance is part of the project requirement. It can cover flat and larger surfaces in compatible HVAC, equipment and building insulation applications. When the insulation remains visible, the chosen color can coordinate with equipment, piping systems or surrounding interior finishes.
The plain self-adhesive version is suited to requirements for an adhesive-backed colored surface. Where the specification calls for a metal-faced construction, the grid-aluminum-faced self-adhesive option is available. Projects primarily concerned with an aluminum-faced product can also refer to Foil Faced Rubber Foam Board.
Thermal Performance & Product Data
Color affects visible appearance; it does not replace thermal design or moisture-control measures. Insulation and condensation performance depend on the foam construction, installed thickness and continuous sealing at joints and edges.
The stated thermal conductivity at 0°C and service-temperature range relate to the tested foam construction. Adhesive-backed or metal-faced versions may have additional limitations. For an exposed installation, relevant fire and technical documentation should correspond to the selected color, surface finish and backing rather than being assumed to apply to every version.
Test evidence for one configuration should not automatically be treated as evidence for all color combinations. When the surface will be visible, batch approval should also address color variation, surface durability and cleaning requirements.
Factory Supply & Order
When requesting a quotation for colored rubber foam board, specify the required color, thickness, surface construction, board length and width, and purchase quantity. If the project requires a particular color match, provide a color reference or project sample with the inquiry. Any required vapor-resistance data or other defined technical information can be discussed against the selected configuration and included in the quotation where applicable.
Butyl tape is available as an optional accessory. For engineering procurement, distribution or continuing orders, the confirmed color, thickness and surface form can serve as the basis for subsequent supply arrangements.
Related Rubber Foam Products & Resources
Request a Colored Rubber Foam Board Quote
Send your proposed configuration and project or bulk-order requirements to Insulvora. We can confirm the applicable product details and requested technical information in the quotation.
