Foil Faced Rubber Foam Board
Insulvora manufactures foil faced rubber foam board for HVAC ductwork and other areas where insulation is installed in sheets and an aluminum outer facing is required. The finished construction combines a closed-cell NBR/PVC rubber foam base, aluminum facing, and self-adhesive backing. The available range includes several board thicknesses, foam colors, and facing patterns, along with an optional double-layer composite construction.
Foil Faced Rubber Foam Board Specifications
The board is supplied as a finished, aluminum-faced insulation product rather than separate foam and facing components. The specification range below identifies the available base-foam options and construction choices. Select the required configuration before matching technical documents to a particular order.
How to Read the Performance Data
The listed density, thermal conductivity, service-temperature range, and B1 fire-performance designation relate to the NBR/PVC rubber foam base. In particular, the thermal-conductivity figure is stated at 0°C. These base-material figures should not be interpreted as independent performance results for every finished foil faced rubber foam board construction, including double-layer assemblies.
Where a project specifies aluminum-facing performance, the relevant properties may include facing thickness, basis weight, reflectivity, and vapor permeance. Technical data and documentation for these requirements must correspond to the actual facing and completed board construction. The optional double-layer composite is a separate finished configuration from the standard single-layer board; it should be identified accordingly when confirming product requirements.
Typical Applications
Foil faced rubber foam board is primarily used for air-duct insulation and other HVAC or building areas where insulation is applied in sheet form. An aluminum outer surface is part of the supplied construction, while the selected foam thickness and facing pattern can be matched to the project's specified finish and installation area.
For flat or sheet-applied areas, board form is the relevant product format. Pipework that requires a tubular shape and corresponding aluminum-facing construction can instead be directed to Foil Faced Rubber Foam Pipe. This distinction helps purchasers select the appropriate format without treating board and pipe insulation as interchangeable.
Factory Supply & Order
Insulvora supplies foil faced rubber foam board for bulk projects and distributor purchasing. Orders are evaluated against the requested finished construction, not simply the foam thickness. The self-adhesive backing is part of the specified board assembly, and requests for the optional double-layer composite should be identified separately from standard single-layer boards.
Information to Include with an Inquiry
- Board selection: Required thickness and preferred base-foam color.
- Facing selection: Square, square-grid, or grid pattern, together with any specified facing properties.
- Construction: Standard single-layer board or optional double-layer composite.
- Order requirements: Quantity, packing preferences, and delivery requirements.
- Project conditions: Intended duct or other sheet-applied area, and any defined fire, vapor-control, or surface-performance requirements.
Insulvora can review the requested combination and confirm the applicable product configuration, packing and delivery arrangements, and the corresponding product documentation. Where a requirement concerns the finished facing or composite assembly, the quotation and supporting information should be matched to that exact construction.
Related Rubber Foam Products & Resources
Request a Foil Faced Rubber Foam Board Quote
Send your required board configuration, estimated quantity, and project requirements through our quotation form. We will review the request and confirm the relevant product options and supply details for your project or distributor order.
