Rubber Foam Insulation · Self-Adhesive Board

Self Adhesive Rubber Foam Board

Insulvora manufactures Self Adhesive Rubber Foam Board from closed-cell flexible NBR/PVC elastomeric foam for HVAC duct surfaces, equipment surfaces, and other flat or broad insulation areas. Self-adhesive backing is available for direct bonding to suitable substrates; non-adhesive, aluminum-faced, and composite versions can also be specified according to the required construction.

NBR/PVCClosed-cell rubber foam base
≤0.034 W/m·KThermal conductivity at 0°C
-40 to +105°CFoam service temperature range

Self Adhesive Rubber Foam Board Specifications

The available range includes different thicknesses, colors, surface finishes, and backing types. Select the required construction from the specifications below; the finished combination is confirmed for the order.

Available Specification Range Rubber Foam Board
Product FormBoard
MaterialClosed-cell flexible NBR/PVC elastomeric rubber foam
Density65–85 kg/m³
Thickness5 / 7 / 7.5 / 10 / 15 / 20 / 25 / 30 / 50 mm
Thermal Conductivity≤0.034 W/m·K at 0°C
Service Temperature-40 to +105°C
Fire-Performance DesignationB1, oxygen index ≥32
Moisture-Resistance Factor≥1000
ColorsBlack / gray / creamy white / blue / green / yellow / orange / rice white
Surface OptionsPlain surface / square-grid aluminum facing / unfaced
Backing OptionsSelf-adhesive / non-adhesive
Other ConstructionComposite configurations available

Board length and width depend on the selected thickness and surface construction and are confirmed in the actual supply specification. For composite versions, the selected structure is produced with the corresponding rubber foam base specification.

Typical Applications

Self Adhesive Rubber Foam Board is used mainly on HVAC ductwork, equipment surfaces, and other flat or broad areas where board-format insulation is specified. Its flexible board form supports coverage of these surfaces, while the adhesive-backed version combines the foam and bonding layer for direct application to a compatible substrate.

For pipework specified primarily by pipe diameter, an appropriate rubber foam pipe product may be a better fit.

Installation & Performance Considerations

The closed-cell rubber foam provides thermal insulation and vapor control. The adhesive backing helps position and bond the insulation, but it does not replace selecting adequate thickness or sealing joints, edges, and penetrations to control condensation.

Installation surfaces must be clean, dry, and compatible with the selected adhesive. Press large bonded areas firmly to avoid trapped air, lifted edges, and local loss of adhesion. Mechanical fixing may also be required depending on the board weight, substrate, and service environment.

The thermal conductivity value and -40 to +105°C service temperature range refer to the rubber foam substrate. Adhesive and facing limitations must be checked separately. The stated B1 designation and moisture-resistance data must also correspond to the final supplied construction.

Request a Self Adhesive Rubber Foam Board Quote

For project and bulk quotations, provide the required thickness, color, surface finish, backing type, composite construction if applicable, and purchase quantity. Insulvora can use these details to confirm the corresponding product version, board dimensions, and supply requirements for quotation.