Accessories · Reinforced Seaming Tape

PET Reinforced Seaming Tape

Insulvora manufactures PET reinforced seaming tape in roll form for insulation joints, overlaps and cut-edge finishing. Its PET-reinforced backing and adhesive layer provide an anti-tear construction for connection points in thermal insulation and sewer-pipe sound-insulation assemblies.

PET Reinforcement material
Joints & Overlaps Primary connection positions
Roll Supply form

PET Reinforced Seaming Tape Specifications

Select tape dimensions according to the required insulation detail, including the seam, overlap or edge connection.

Available Product Specification Reinforced Seaming Tape
Reinforcement PET
Product Type Reinforced Seaming Tape
Product Form Roll
Tape Width To Product Specification
Tape Thickness To Product Specification
Roll Length To Product Specification

Technical Data and Suitability

PET reinforcement provides the anti-tear structure, while the adhesive layer must be matched to the insulation surface or facing. These are separate considerations: reinforcement alone does not establish adhesive, temperature or fire performance.

Applicable product documentation may provide adhesive chemistry, backing thickness and numeric tear-strength values for the supplied construction. Where a project specifies temperature, fire or adhesion criteria, the corresponding product information should be checked against those requirements. Installation conditions also need to be considered when assessing suitability.

Typical Applications

Thermal Insulation Joints

The tape is used to finish straight seams between adjoining insulation sections, overlap areas and cut edges where a reinforced closure is required.

Sewer-Pipe Sound Insulation

It can connect and finish material seams and edges within a pipe sound-insulation assembly.

Factory Supply & Order Specifications

For project or bulk orders, the following information helps Insulvora review the requested construction and prepare a quotation.

Dimensions & Quantity

Specify tape width, thickness, roll length and required quantity.

Surface & Application

Identify the insulation substrate or facing, whether the tape is for a joint, overlap or cut edge, and the intended insulation system.

Technical Requirements

State the installation environment and any defined temperature, fire or adhesion criteria. Include any product documentation requirements relevant to the order.

Request a PET Reinforced Seaming Tape Quote

Send the required dimensions, quantity, insulation surface and intended application. Insulvora can review the requested construction and confirm applicable product information and quotation details.