Rubber Foam Insulation · Aluminum-Foil Faced Pipe

Foil Faced Rubber Foam Pipe

Insulvora manufactures foil faced rubber foam pipe using closed-cell NBR/PVC elastomeric foam as the main insulation layer and aluminum foil as the outer facing. Supplied as preformed tubular sections, the product is available in multiple sleeve inner diameters and insulation thicknesses for water pipes, solar hot-water lines, freeze-protection piping, fire-protection piping and other compatible pipe-insulation projects.

65–85 kg/m³ Density range
≤0.034 W/m·K at 0°C Thermal conductivity
-40 to +105°C Base material service temperature

Foil Faced Rubber Foam Pipe Specifications

Each section combines a closed-cell rubber foam tube with a separate aluminum-foil outer surface. The rubber foam provides the main thermal insulation, while the foil creates the finished facing. Unlike standard unfaced rubber foam pipe insulation, this product is supplied with its outer facing already incorporated into the preformed tube.

Available Specification Range

Material Closed-cell elastomeric NBR/PVC rubber foam
Density 65–85 kg/m³
Thermal Conductivity ≤0.034 W/m·K at 0°C
Base Material Service Temperature -40 to +105°C
Sleeve Inner Diameter 10 / 16 / 20 / 22 / 25 / 26 / 27 / 32 / 34 / 43 / 44 / 48 / 49 / 60 / 76 / 77 / 89 / 90 / 108 / 110 mm
Insulation Thickness 15 / 20 / 25 / 30 / 40 / 50 mm
Section Length 1.9 m
Outer Surface Aluminum foil

The sleeve inner diameter should correspond to the actual pipe outside diameter; insulation thickness is a separate specification. This allows a project with several pipe sizes to identify the required sleeve and thickness for each line. The published conductivity and temperature values describe the NBR/PVC insulation base under the conditions stated above, rather than an additional performance rating for the foil facing.

Typical Applications

Foil faced rubber foam pipe is used where a preformed pipe sleeve with an aluminum-foil exterior is required. Its main insulation layer helps reduce heat transfer, while the tubular form follows straight pipe runs selected by pipe diameter.

Piping ApplicationFunction of the Insulation
Water Piping Helps limit heat exchange between the pipe and its surroundings where rubber foam insulation is specified.
Solar Hot-Water Piping Helps reduce heat loss from the hot-water line.
Freeze-Protection Piping Slows heat transfer to colder surroundings, helping the insulated pipe retain heat longer.
Fire-Protection Piping Provides a preformed pipe-insulation option where rubber foam insulation is specified for the piping system.

Request a Foil Faced Rubber Foam Pipe Quote

For a quotation, provide the actual pipe outside diameter or required sleeve inner diameter, insulation thickness and purchase quantity. If a project contains several pipe sizes, list each diameter, thickness and quantity combination separately. Insulvora can use that information to confirm the requested product specifications and prepare a quotation for the required supply.