Rock Wool · Preformed Pipe

Rock Wool Pipe

Insulvora manufactures preformed rock wool pipe for thermal insulation of industrial and mechanical piping. Its cylindrical form is made to fit defined pipe diameters and is used on steam and hot-service lines, process piping, boiler-room and power-plant piping, and other straight runs.

22–910 mmAvailable inner diameter range
20–150 mmAvailable insulation thickness
600°CMaximum working temperature

Rock Wool Pipe Specifications

The product is specified by insulation inner diameter and insulation thickness. The insulation bore must match the actual outside diameter of the pipe. For pipe sizes expressed as DN or NPS, use the applicable pipe standard to identify the corresponding outside diameter rather than selecting an insulation bore from the nominal size alone.

Available Specification Range Preformed Pipe
Product FormPreformed Pipe
Density40–200 kg/m³
Inner Diameter22–910 mm
Insulation Thickness20–150 mm
Length1 m
Thermal Conductivity0.035–0.042 W/m·K
Maximum Working Temperature600°C
Combustion PerformanceClass A (GB 8624)
OEMAvailable

The listed thermal conductivity and working-temperature values are product data for evaluating insulation requirements on hot-service piping. The mineral wool insulation layer helps reduce heat transfer from operating pipes. Its fibrous structure also contributes to sound absorption around industrial and mechanical lines.

Typical Applications

Typical services include steam distribution, hot-service and process lines, boiler-room piping, power-plant piping, and other plant utility lines where thermal insulation is required.

Further applications include chemical and petrochemical process systems, mechanical equipment rooms, equipment-connected lines, thermal distribution pipework, and continuously operating services. Pipe size, operating temperature, and any required external protection should be identified when specifying insulation for these settings.

Factory Supply & Order Specification

Insulvora supplies rock wool pipe in the available sizes and thicknesses for project and distribution orders. A project requirement may list several pipe sizes, each with its own insulation thickness and quantity. The following details help define the requested supply.

Pipe Dimensions

State the required insulation inner diameter or provide the actual pipe outside diameter. For DN or NPS schedules, include the applicable pipe standard so the insulation bore can be matched to the pipe.

Facing & Jacketing

Facing, foil, glass cloth, jacketing, and aluminum jacketing can be supplied as project-specific external configurations. Indicate which configuration is required for each relevant pipe size.

OEM Supply

OEM supply is available for project and distribution orders. Product dimensions and external configurations are arranged according to the stated order requirements.

Request a Rock Wool Pipe Quote

For a project or bulk-supply quotation, send the pipe outside diameter or required insulation bore, insulation thickness, quantity by size, and any facing or jacketing requirements. Insulvora can review the requested dimensions and configurations and discuss the applicable product options before preparing the quotation.