Roof Rock Wool Board
Insulvora supplies Roof Rock Wool Board for thermal and acoustic insulation in building roof systems. These rigid mineral-wool boards are intended for projects that require specified thermal, mechanical, water-repellency and combustion-performance properties.
Roof Rock Wool Board Specifications
Made from rock wool (mineral wool), the product is supplied in board form for roofing applications. The standard size and available specification ranges are listed below for material selection and project purchasing.
Typical Applications
Roof rock wool board can provide a continuous insulation layer in metal roof systems and in roofs of industrial facilities, warehouses and commercial buildings. Depending on the approved roof build-up, boards may be installed above the deck and below a waterproofing membrane, metal roof covering or another protective layer.
Rigid boards help maintain a consistent insulation thickness and regular joints across large roof areas. Product selection should consider deck support spacing, fixing methods, the waterproofing system, and loads during construction and service.
Roof slope, vapor control, waterproofing and external weather protection depend on other layers in the assembly. Board layouts should avoid narrow edge pieces, clustered joints and local gaps. For multilayer installations, plan staggered joints, the fixing sequence and close contact between layers.
Performance & Product Data
The roof U-value depends on the board's thermal conductivity and installed thickness, as well as continuity around joints, fixings and penetrations. Compressive strength must suit the roof system's construction and service loads. The stated 70–150 kPa range covers different grades and must not be read as one value for every board.
Water repellency does not replace a waterproofing membrane or adequate drainage design. Class A1 identifies the tested board's reaction-to-fire performance; the completed roof assembly must meet the project's system-level fire requirements.
The stated 600°C material limit is a product property and does not represent normal roof service temperatures.
Factory Supply & Order Specification
Insulvora manufactures mineral-wool roofing boards for project, distribution and bulk purchasing. Production and quotations are based on the selected board specification, order quantity and roof application.
Confirm the required density, thickness and board dimensions, including whether the standard board size meets the project requirements. Where thermal conductivity, compressive strength, combustion performance or another technical value is mandatory, identify the applicable requirement or grade in the order specification.
Send the requested board specification, purchase quantity and intended roofing application. These details provide the basis for reviewing the product configuration and preparing a project or bulk-supply quotation.
Container Loading Reference
Estimated board area per container for 1200 × 600 mm boards.
| Thickness | 20GP | 40GP | 40HQ |
|---|---|---|---|
| 30 mm | 868 m² | 1,763 m² | 2,000 m² |
| 50 mm | 521 m² | 1,058 m² | 1,200 m² |
| 60 mm | 434 m² | 882 m² | 1,000 m² |
| 80 mm | 326 m² | 661 m² | 750 m² |
| 100 mm | 261 m² | 529 m² | 600 m² |
| 120 mm | 217 m² | 441 m² | 500 m² |
| 150 mm | 174 m² | 353 m² | 400 m² |
For preliminary freight planning only. Figures assume 60 m³ of board volume per 40HQ; 20GP and 40GP estimates are scaled by container volume. Actual loading depends on packing, pallets, stacking and permitted payload. The final loading plan is confirmed with the quotation.
Related Rock Wool Products & Resources
Request a Roof Rock Wool Board Quote
Share your roof application, preferred board specification and purchase quantity to discuss suitable options and request a project or bulk-supply quotation.
