AC Copper Pipe Insulation Sleeve
Insulvora manufactures preformed NBR/PVC rubber foam sleeves for small-bore copper refrigerant lines. This AC copper pipe insulation range uses an open-sleeve format and is offered in multiple inner diameters, with 8 mm or 15 mm insulation thicknesses and red or blue configurations. It is intended mainly for air-conditioning copper tubing and related refrigeration lines.
AC Copper Pipe Insulation Sleeve Specifications
These sleeves are made from closed-cell NBR/PVC elastomeric rubber foam and supplied as preformed, open pipe sections. Select the sleeve inner diameter to match the actual outside diameter of the copper tube. Insulation thickness and section length are specified separately so that each line can be supplied with the appropriate configuration.
The stated thermal conductivity helps limit heat transfer between the copper line and its surroundings. On refrigerant lines operating below ambient temperature, the closed-cell material also supports condensation control and vapor management. These are material characteristics to consider alongside the actual operating and installation conditions when assessing an insulation system.
This product covers the listed small-bore copper-tube sizes. For larger tube or pipe sizes, Insulvora supplies a separate rubber foam sleeve series with inner diameters up to 110 mm and insulation thicknesses from 15 to 50 mm. That larger series is a distinct product range, not an extension of the size options in the table above.
Typical Applications
These sleeves are used mainly on copper refrigerant lines in split air-conditioning, multi-split and VRV/VRF systems. Typical positions include connections between indoor and outdoor units and small-bore lines serving related refrigeration equipment. The product is relevant to residential air-conditioning and light-commercial HVAC installations using copper refrigerant piping.
AC copper pipe insulation in this flexible, preformed format can be used along compact pipe routes and runs with multiple direction changes. In systems with several copper tube diameters, individual lines can be insulated with appropriately sized sleeves from the same product range.
Factory Supply & Order
Insulvora manufactures and supplies AC copper pipe insulation sleeves for projects requiring a single size in volume or several sizes in one order. Each requested configuration can be identified by its sleeve inner diameter, insulation thickness, section length, color and quantity. The listed specifications establish the available range; the actual combination is confirmed for the order.
For a quotation, provide the copper tube outside diameters, required insulation thicknesses, preferred section lengths and colors, and the quantity for each configuration. This gives a clear basis for checking the requested sleeve sizes and preparing a project or bulk-supply quotation.
Technical data sheets, test information and performance documents can be provided for the corresponding sleeve series when required for project purchasing. Information concerning refrigerant compatibility, vapor resistance or condensation control is matched to the configuration being supplied rather than treated as identical across different sleeve ranges.
Related Products & Resources
Request an AC Copper Pipe Insulation Quote
Send Insulvora your copper tube sizes, required sleeve thicknesses and quantities. We can confirm the relevant product configurations, discuss applicable technical documents and prepare a quotation for your air-conditioning or refrigeration project.
