Rubber Foam Insulation · Preformed Pipe Sleeve

High Density Rubber Foam Pipe

Insulvora manufactures high density rubber foam pipe from closed-cell NBR/PVC elastomeric rubber foam in a preformed sleeve format. The series is intended for water pipes, PPR hot- and cold-water lines, solar hot-water piping, and air-conditioning systems. Its range of sleeve sizes and insulation thicknesses supports both single-size purchases and projects involving several pipe diameters.

80–110 kg/m³ Density range
15–50 mm Insulation thickness range
-40°C to +105°C Service temperature range

High Density Rubber Foam Pipe Specifications

This series is supplied as individual preformed pipe sleeves. The key dimensions for selection are the sleeve inner diameter, insulation thickness, and section length. These are separate specification items: the sleeve size must correspond to the actual outside diameter of the pipe being insulated, while the thickness is selected for the insulation requirement.

Available Specification Range Preformed Rubber Foam Pipe Sleeve
Material Closed-cell NBR/PVC elastomeric rubber foam
Density 80–110 kg/m³
Sleeve Inner Diameter 10 / 16 / 20 / 22 / 25 / 26 / 27 / 32 / 34 / 43 / 44 / 48 / 49 / 60 / 76 / 77 / 89 / 90 / 108 / 110 mm
Insulation Thickness 15 / 20 / 25 / 30 / 40 / 50 mm
Section Length 1.9 m
Thermal Conductivity ≤0.034 W/m·K at 0°C
Service Temperature -40°C to +105°C
Fire Performance B1, oxygen index ≥32
Product Form Preformed pipe sleeve

The available sizes cover a range of common pipe dimensions, but the sleeve inner diameter and insulation thickness should be specified as a combination for each pipe size. The appropriate size combination can be checked against the project pipe schedule when preparing an order.

Typical Applications

High density rubber foam pipe is used for building-services and mechanical piping, including hot- and cold-water distribution, PPR pipes, solar hot-water lines, air-conditioning pipework, and HVAC systems. Its tubular form is suited to straight pipe runs and other sections where preformed pipe sleeves are specified rather than general-purpose insulation sheets.

In chilled-water and refrigeration services, the insulation helps reduce heat gain and control condensation at cold pipe surfaces. On hot-water and solar hot-water lines operated within the product's stated temperature range, it helps reduce heat loss along the pipework. These applications may be part of a wider MEP installation in which multiple pipe diameters must be insulated under one project specification.

Thermal Performance & Product Data

The closed-cell NBR/PVC foam structure provides thermal insulation and helps resist water-vapor ingress through the insulation body. This is particularly relevant for chilled-water, refrigeration, and air-conditioning pipework, where moisture control helps maintain insulation performance around cold surfaces.

For this high density rubber foam pipe series, the recorded thermal conductivity is ≤0.034 W/m·K at 0°C. This value is stated at its reference temperature and should be considered alongside insulation thickness and the intended pipe service when evaluating heat-transfer requirements.

The stated service temperature range is -40°C to +105°C. Fire performance is recorded as B1, with an oxygen index of ≥32. These figures describe the supplied product series; suitability for a particular project should be checked against its operating conditions and specification requirements.

Factory Supply & Order Specification

Insulvora supplies high density rubber foam pipe in standard 1.9 m preformed sections. Orders are specified by the actual pipe outside diameter, corresponding sleeve inner diameter, insulation thickness, and required quantity. Single-size purchases and mixed-size piping projects can both be organized within the same product series.

Pipe Size Schedule & Mixed-Size Orders

For a project with several pipe diameters, list each size separately with its pipe outside diameter, required sleeve size, insulation thickness, and quantity. Separating quantities by sleeve dimension keeps the quotation, production, and packing aligned with the project schedule while allowing the different sizes to be coordinated within one order.

Project Documents

When technical records are required for purchasing review, available product datasheets and supporting test information can be supplied for the ordered series. The documentation should correspond to the material and performance data specified for delivery.

Request a High Density Rubber Foam Pipe Quote

To request a quote for high density rubber foam pipe, send the actual pipe outside diameter, required insulation thickness, and quantity for each size. Include any density, fire-performance, or technical-document requirements specified for your project. Insulvora can then check the corresponding sleeve specification and prepare the quotation based on those details.