Glass Wool · Building Insulation

R2.5 Glass Wool Insulation

Insulvora manufactures and supplies R2.5 Glass Wool Insulation for building projects and distributor orders involving walls, partitions, ceilings and roof spaces. Our glass wool production range includes densities of 24–120 kg/m³, thicknesses of 20–200 mm, widths of 600–1200 mm and lengths of 600–2400 mm. Faced and unfaced configurations can be specified according to the intended building assembly. The final configuration should be selected against the project’s R-value and assembly requirements.

R2.5 Specified thermal resistance
24–120 kg/m³ Factory density range
20–200 mm Factory thickness range

R2.5 Glass Wool Insulation Specifications

The values below describe the available glass wool production range, not a single fixed R2.5 product configuration. Actual product selection depends on the specified thermal resistance, the declared conductivity of the chosen grade, and the dimensions and facing required by the project.

Factory Production Range Glass Wool Insulation
Density 24–120 kg/m³
Thickness 20–200 mm
Width 600–1200 mm
Length 600–2400 mm
Thermal Conductivity 0.038–0.042 W/m·K
Maximum Working Temperature 450°C
Product Form & Facing

Faced and unfaced glass wool configurations are available for project supply. The appropriate surface option should be selected alongside the required dimensions and the design of the surrounding building assembly. Product form should also be confirmed when the project specifies a particular installation method.

Typical Applications

R2.5 glass wool insulation is suitable for framed exterior walls, ceilings, roof spaces and other building-envelope areas where the design specifies R2.5 thermal resistance. Material dimensions should suit the cavity depth, framing arrangement and support system rather than being selected from the factory range on size alone.

Rolls are suited to continuous ceiling and roof areas. Batts or boards may be more appropriate for repeated wall cavities, partitions or fixed panel layouts; the required form should be confirmed for the order. Curtain wall applications also require the insulation configuration to match the specified assembly.

Facing selection depends on the moisture-control and lining design, not simply on whether a faced option is available. The chosen product must fit the planned installation without excessive compression.

Thermal Performance & Product Data

R2.5 glass wool insulation must be selected to achieve the required thermal resistance; that rating does not apply automatically to every density or thickness listed in the production range. The necessary thickness depends on the declared thermal conductivity of the specific glass wool grade and the applicable test method. The thermal performance of the ordered configuration should therefore be checked against the project requirement.

Installed performance also depends on the material expanding to its intended thickness, closely fitted edges, and insulation continuity around framing members and penetrations. Gaps, compression or discontinuities can reduce the effectiveness of the completed insulation layer.

A facing provides its intended vapor-control function only when its permeance and sealing details are defined for the complete assembly. Fire and acoustic requirements need separate product or system evidence, while thermal bridges may require additional assembly-level calculations or junction checks.

Factory Supply & Order Specification

Insulvora manufactures R2.5 Glass Wool Insulation for contractors, distributors and building projects. Standard project orders and customized specifications can be discussed within the available production range. For an accurate quotation, provide the intended application, required R-value, density or specified grade, dimensions, facing, estimated quantity and any project-document requirements.

Project Supply & Packing

Packaging, labeling and destination details can be included in the order specification for quotation and shipment preparation. These requirements are assessed together with the selected product configuration and order quantity.

Technical Documents

Technical datasheets, available test reports and applicable product or compliance documents can be provided according to the quoted glass wool product and the project's requirements. Product-specific performance should be confirmed from the relevant documents rather than inferred from the general factory range.

Request an R2.5 Glass Wool Insulation Quote

Share your project application, required thermal resistance, preferred product form, dimensions, facing, quantity and delivery destination. Insulvora can review the requested configuration and prepare a project or bulk-supply quotation based on the information provided.