Rock Wool · Roofing Board

Roof Rock Wool Board

Insulvora supplies Roof Rock Wool Board for thermal and acoustic insulation in building roof systems. These rigid mineral-wool boards are intended for projects that require specified thermal, mechanical, water-repellency and combustion-performance properties.

100–200 kg/m³Available density range
30–150 mmAvailable thickness range
70–150 kPaCompressive strength

Roof Rock Wool Board Specifications

Made from rock wool (mineral wool), the product is supplied in board form for roofing applications. The standard size and available specification ranges are listed below for material selection and project purchasing.

Specification Range Roofing Board
Density100–200 kg/m³
Thickness30–150 mm
Standard Board Size1.2 × 0.6 m
Thermal Conductivity0.038–0.045 W/m·K
Maximum Operating Temperature600°C
Compressive Strength70–150 kPa
Water Repellency≥98%
Combustion PerformanceClass A1 (GB 8624)
Main FunctionThermal & Acoustic Insulation

Typical Applications

Roof rock wool board can provide a continuous insulation layer in metal roof systems and in roofs of industrial facilities, warehouses and commercial buildings. Depending on the approved roof build-up, boards may be installed above the deck and below a waterproofing membrane, metal roof covering or another protective layer.

Rigid boards help maintain a consistent insulation thickness and regular joints across large roof areas. Product selection should consider deck support spacing, fixing methods, the waterproofing system, and loads during construction and service.

Roof slope, vapor control, waterproofing and external weather protection depend on other layers in the assembly. Board layouts should avoid narrow edge pieces, clustered joints and local gaps. For multilayer installations, plan staggered joints, the fixing sequence and close contact between layers.

Performance & Product Data

The roof U-value depends on the board's thermal conductivity and installed thickness, as well as continuity around joints, fixings and penetrations. Compressive strength must suit the roof system's construction and service loads. The stated 70–150 kPa range covers different grades and must not be read as one value for every board.

Water repellency does not replace a waterproofing membrane or adequate drainage design. Class A1 identifies the tested board's reaction-to-fire performance; the completed roof assembly must meet the project's system-level fire requirements.

The stated 600°C material limit is a product property and does not represent normal roof service temperatures.

Factory Supply & Order Specification

Insulvora manufactures mineral-wool roofing boards for project, distribution and bulk purchasing. Production and quotations are based on the selected board specification, order quantity and roof application.

Specification & Production

Confirm the required density, thickness and board dimensions, including whether the standard board size meets the project requirements. Where thermal conductivity, compressive strength, combustion performance or another technical value is mandatory, identify the applicable requirement or grade in the order specification.

Project Supply & Quotation

Send the requested board specification, purchase quantity and intended roofing application. These details provide the basis for reviewing the product configuration and preparing a project or bulk-supply quotation.

Container Loading Reference

Estimated board area per container for 1200 × 600 mm boards.

Thickness20GP40GP40HQ
30 mm868 m²1,763 m²2,000 m²
50 mm521 m²1,058 m²1,200 m²
60 mm434 m²882 m²1,000 m²
80 mm326 m²661 m²750 m²
100 mm261 m²529 m²600 m²
120 mm217 m²441 m²500 m²
150 mm174 m²353 m²400 m²

For preliminary freight planning only. Figures assume 60 m³ of board volume per 40HQ; 20GP and 40GP estimates are scaled by container volume. Actual loading depends on packing, pallets, stacking and permitted payload. The final loading plan is confirmed with the quotation.

Request a Roof Rock Wool Board Quote

Share your roof application, preferred board specification and purchase quantity to discuss suitable options and request a project or bulk-supply quotation.