PPR Pipe Insulation Sleeve
Insulvora manufactures the PPR Pipe Insulation Sleeve series from closed-cell NBR/PVC elastomeric rubber foam for PPR hot- and cold-water piping. Supplied as preformed open sleeves in blue or red, the range is intended for small-bore water lines. Multiple inner diameters, insulation thicknesses and section lengths allow buyers to specify products for individual pipe sizes or building projects.
PPR Pipe Insulation Sleeve Specifications
Each sleeve has a fixed circular cross-section and an open, preformed profile. The sleeve inner diameter is the principal sizing reference and should correspond to the actual outside diameter of the PPR pipe. Check this match first, then select the required insulation thickness and section length to complete the sleeve specification.
The listed thermal-conductivity value is specified at 0°C. Around water piping, the closed-cell foam helps limit heat loss from hot-water lines and heat gain on cold-water lines. The service-temperature range gives the stated operating limits; project temperatures should be considered when confirming the required sleeve specification.
B1 fire-performance options are configuration-specific. Confirm that the selected product version matches any fire-performance requirements stated in the project specification.
Typical Applications
The PPR pipe insulation sleeve is mainly intended for small-bore PPR hot- and cold-water pipes in building water-supply systems. Typical locations include supply lines, risers and branch pipes in residential, commercial and public buildings. Its preformed profile follows straight pipe runs in conventional indoor installations requiring elastomeric thermal insulation.
This range is focused on PPR water piping. Air-conditioning copper pipes, refrigerant lines and other specialized piping systems should be matched to their corresponding elastomeric pipe-insulation products rather than assumed to use the same sleeve specifications.
Factory Supply & Order
Insulvora can supply the PPR pipe insulation sleeve as a single-size item or as part of a project order covering several PPR pipe sizes. For each line item, identify the PPR pipe outside diameter or required sleeve inner diameter, insulation thickness, section length, color and quantity. Listing combinations separately keeps the product specification for each size clear throughout order preparation and supply.
For projects requiring B1 products or defined test documents, indicate the requirement with the relevant order specifications. Available fire-performance test records and technical documentation can be provided for the corresponding supplied configuration. If a particular test standard or document is required, confirm its applicability to that configuration before placing an order.
Related Elastomeric Pipe Products & Resources
Request a PPR Pipe Insulation Sleeve Quote
Send the required pipe sizes, insulation thicknesses, lengths, colors and quantities, together with any B1 or technical-document requirements. Insulvora can review the requested combinations, confirm the applicable supply specification and prepare a project or bulk-supply quotation.
