Fiberglass Wool Insulation

Fiberglass Wool Insulation in Roll, Board and Pipe Forms

Insulvora manufactures fiberglass wool insulation in rolls, boards and preformed pipe sections for building envelopes, roofs, ceilings, HVAC piping and acoustic assemblies. Flexible rolls suit continuous coverage across large areas; boards provide a defined panel format; and preformed sections fit straight pipe runs. Use the product and application routes below to find the relevant specification page.

Fiberglass wool insulation roll for building applications
Complete Glass Wool Product Range

Fiberglass Wool Insulation Products

Choose fiberglass wool by product form or by a specific project requirement. Six routes cover rolls, boards and pipe sections, while three others address cold storage or specified thermal-resistance targets. Each route leads to more detailed product information.

01 Glass wool roll for flexible thermal and acoustic insulation

Glass Wool Roll

Density10–72 kg/m³

Flexible fiberglass wool insulation rolls for roofing, industrial buildings and other large-area applications where continuous blanket coverage is suitable. Specify density, thickness, roll width and roll length for the intended installation.

View Glass Wool Roll
02 Foil faced glass wool roll with aluminium facing

Foil Faced Glass Wool Roll

Base blanket density10–48 kg/m³

A flexible fiberglass wool roll with a defined outer facing. Available configurations include single-sided or double-sided aluminium foil and reinforced facing options, depending on the selected product specification.

View Foil Faced Glass Wool Roll
03 Glass wool insulation board

Glass Wool Board

Density24–100 kg/m³

A stable fiberglass insulation panel for walls, partitions, roofs, curtain-wall areas and other compatible thermal-acoustic assemblies. Panel dimensions, density and thickness are selected for the intended installation.

View Glass Wool Board
04 High density fiberglass insulation board

High Density Glass Wool Board

Density64–120 kg/m³

A firmer glass wool panel for projects requiring a higher-density board format. Check the required density, board thickness and dimensions against the intended assembly.

View High Density Glass Wool Board
05 Fire resistant glass wool insulation board

Fire Resistant Glass Wool Board

Density48–100 kg/m³

A glass wool board for projects where thermal and acoustic insulation must also meet a defined fire-performance requirement. Fire classification depends on the applicable tested product construction and must be checked for the proposed assembly.

View Fire Resistant Glass Wool Board
06 Preformed glass wool pipe insulation section

Glass Wool Pipe Insulation

Density40–80 kg/m³

Preformed fiberglass wool pipe sections for straight pipeline runs requiring consistent insulation thickness around the pipe. Selection depends on pipe size, insulation thickness and service conditions.

View Glass Wool Pipe Insulation
07 Glass wool insulation for cold storage envelope applications

Cold Storage Glass Wool Insulation

DensityDetermined per project

Project-specific fiberglass wool insulation for cold-storage envelopes, where insulation must be coordinated with vapor control, air sealing and the complete cold-room construction. Density and thickness are confirmed against the actual project requirements.

View Cold Storage Glass Wool Insulation
08 R13 fiberglass insulation roll for R13 R19 and R20 requirements

R13 R19 R20 Fiberglass Insulation

Density10–48 kg/m³

Flexible fiberglass wool rolls or blankets supplied for R13, R19 and R20 requirements. The exact thermal-resistance construction is confirmed for each project rather than inferred from the R-value label alone.

View R13 R19 R20 Fiberglass Insulation
09 Glass wool insulation for an R2.5 thermal resistance requirement

R2.5 Glass Wool Insulation

DensityNot fixed by R2.5 alone

Glass wool insulation for an R2.5 thermal-resistance target. R2.5 does not define a universal density or thickness; the specific offered construction determines the final product configuration.

View R2.5 Glass Wool Insulation
Building and Acoustic Applications

Glass Wool for Building and Acoustic Applications

Wall & Partition Applications

Fiberglass wool insulation can be used in wall cavities, partitions, curtain-wall areas and enclosure systems where thermal or acoustic performance is required. Rolls and boards are selected according to cavity dimensions, thickness, density, facing and installation arrangement.

Roof & Ceiling Applications

Fiberglass wool rolls provide continuous coverage across larger roof and ceiling areas, while boards provide defined panels where the assembly requires them. Available insulation depth, dimensions, facing and project thermal requirements guide the choice.

Acoustic Assemblies

Fiberglass wool can be supplied for wall, ceiling and enclosure assemblies in which sound absorption forms part of the design. Product form, density and thickness should match the specified construction; no single configuration suits every acoustic assembly.

Product Configuration & Supply

Glass Wool Specifications & Supply

For fiberglass wool insulation orders, confirm the selected product form and the project requirements before finalizing the specification. The following details help align the order with the intended application.

Dimensions, Density & Facing Configuration

For rolls and boards, specify length, width, thickness and density. For pipe sections, provide the pipe size and required insulation thickness. Confirm any facing requirement as part of the ordered product configuration. These details are checked against the selected roll, board or pipe product before production.

Thermal Data & Packing

Product-specific thermal data for fiberglass wool can be provided for the supplied configuration. Where thermal resistance is part of the project requirement, the product data and insulation thickness must match the selected form and construction. Packing is arranged according to product form, order quantity, transport method and destination requirements.

Request a Glass Wool Product Quote

Send your product form, dimensions, thickness, density or facing requirements, estimated quantity and delivery destination. Insulvora can review the requested fiberglass wool insulation configuration and discuss a quotation for project or bulk supply.